Netgear ANT2405 5dBi Omni-directional Antenna - Optimize WLAN Range and Power

NETGEAR’s ProSafe line of antennas and accessories for 802.11b and 802.11g devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points and physical obstructions must be accounted for. With both directional and omni-directional antennas, low-loss cables, mounting hardware, and other accessories, installers can customize a value-priced wireless solution that meets the requirements of even the most challenging applications. All NETGEAR antennas are FCC-approved to work with the following NETGEAR models: WAG302, WG302, WAG102, WG102, FVG318, FWG114P.

Netgear ANT2405 5dBi Omni-directional Antenna - 5 dBi Omni-directional Antenna

Netgear ANT2405 5dBi Omni-directional Antenna is designed to extend coverage of wireless 802.11b or 802.11g devices. The Netgear ANT2405 5dBi Omni-directional Antenna is especially useful in optimizing coverage when you want to place your wireless access point or router out of plain view – in a wiring closet or above a ceiling pad. Locate this antenna at the top of a cubicle, on a ceiling, desktop or wall, where it is more receptive to radio signals. Ideal placement of the Netgear ANT2405 5dBi Omni-directional Antenna is on a wall, 2 m high, or on the ceiling facing the area to cover. Includes mounting brackets, cable sold separately.***

** Omni-directional: Radiates radio-frequency energy equally in all directions for widespread, all-points deployment.

*** NETGEAR recommends use of antenna cable up to 5 m long with the Netgear ANT2405 5dBi Omni-directional Antenna.

Note: To obtain optimal results in extending wireless range with antenna installations, it is recommended that a qualified, professional installer is consulted for site survey and proper installation.

To comply with FCC rules the Netgear ANT2405 5dBi Omni-directional Antenna should only be used with devices that have been FCC approved for use with the ANT24O5. Please check the NETGEAR web site at http://tools.netgear.com/legal/fcc_antennas.html for an updated list of FCC approved devices.

For EU, use of any antenna requires careful planning and extra consideration to comply with EU emissions and health standards and regulations. It is recommended that a qualified professional installer service is consulted for site survey and proper installation. Antenna installation must comply with the maximum level authorized by each country.

Devices that comply with EU regulations to work with the Netgear ANT2405 5dBi Omni-directional Antenna are listed at http://tools.netgear.com/legal/eu_antennas.html.

Netgear ANT2405 5dBi Omni-directional Antenna - Dimensions

• 99.2 x 53.9 x 27.5 mm (3.91 x 21.2 x 1.08 in.)

Netgear ANT2405 5dBi Omni-directional Antenna - Weight

• 55 g/.12 lb.

Netgear ANT2405 5dBi Omni-directional Antenna - Description

• 5 dBi Omni-directional Antenna

Netgear ANT2405 5dBi Omni-directional Antenna - Maximum Outdoor Range³

• 790m (863.95 yds)

Netgear ANT2405 5dBi Omni-directional Antenna - Frequency Range

• 2400 to 2500 MHz

Netgear ANT2405 5dBi Omni-directional Antenna - Gain

• 5 dBi

Netgear ANT2405 5dBi Omni-directional Antenna - Polarization

• Vertical

Netgear ANT2405 5dBi Omni-directional Antenna - Beam Width

• Horizontal 120°
• Vertical 110°

Netgear ANT2405 5dBi Omni-directional Antenna - Operating Temperature

• -20 to 65° C (-4 to 149° F)

Netgear ANT2405 5dBi Omni-directional Antenna - Storage Temperature

• -30 to 80° C (-22 to 176° F)

Netgear ANT2405 5dBi Omni-directional Antenna - ³ Range estimation is based on two wireless nodes, each with an ANT24O5 antenna attached, associating with each other at 11 Mbps under ideal line-of-sight conditions.