Panasonic BL-C20 Wireless IP Cameras

Wireless LAN (802.llb/802.llg)

10x Digital Zoom Function

Multi-camera Capability

Motion Detection Function

Recording Program (Included)

Color Night View Mode (4.00 lux)

Cell Phone Monitoring

Buffered Images

"ECO LEAF"
official homepage is here.

Install the Panasonic BL-C20 wireless camera anywhere^*1 with no transmission cables to connect, and enjoy high-speed communications at 2.4 GHz, 54 Mbps^*2 (IEEE 802.11g) or 2.4 GHz, 11 Mbps^*2 (IEEE 802.11b).

*1 Cannot be used in bathrooms or outdoors.
*2 The indicated speed is the maximum theoretical value of the wireless LAN specification, and does not denote the actual data transfer speed achieved by the Panasonic BL-C20 wireless cameras.

It's so reassuring to see your pet's happy face while you are out. A simple mouse operation is all you need to enlarge the image, using the 10x digital zoom, so you get a clear view of your pet's expression.

* This feature is not available when viewing on a cell phone.

* Area is multiplied by 10x.

Check the images from four Panasonic BL-C20 wireless cameras at once. Monitor 12 Panasonic BL-C20 wireless cameras in all, and display them all at once (with no audio). Use a recording program (BB-HNP11) to save images and audio to a PC hard disk.

*1-1 To use this function, one of the Panasonic BL-C20 wireless cameras must be registered with the addresses of all other Panasonic BL-C20 wireless cameras in advance. The 640 x 480 resolution cannot be used with the multi-screen display.
*1-2 Switching from the moving image mode to the still image mode reduces the load on the network. The still image mode is recommended when the Internet connection speed is 100 kbps or lower (guideline speed).
*1-3 This function can be used only with a PC. It cannot be used with a cell phone.

In this mode, the Panasonic BL-C20 wireless camera captures an image only when motion is detected based on the preset threshold or sensitivity of the Panasonic BL-C20 wireless camera. The image can be stored temporarily in the Panasonic BL-C20 wireless camera, or sent to you by e-mail or FTP data transfer.^*1

*1-1 The sensor's detection history can also be e-mailed to you once each day at a preset time.
*1-2 POP before SMTP authentication and SMTP authentication (PLAIN and LOGIN) are supported. SMTP authentication (CRAM-MD5) is not supported.

You can record the moving images captured by the Panasonic BL-C20 wireless camera on your PC. This lets you enjoy natural motion that isn't possible with still pictures.

*Recording is possible for only one Panasonic BL-C20 wireless camera. To record images from multiple Panasonic BL-C20 wireless cameras, use the BB-HNP11.

Server

Image compression

JPEG (Motion JPEG)

Video resolution

640 x 480, 320 x 240(default), 160 x 120

Image quality

JPEG (favor clarity, standard, favor motion)

Frame rate^*1

Max. 7.5 frames/sec (640 x 480)
Max. 15 frames/sec (320 x 240, 160 x 120)

Security

User ID/password

Supported protocols

TCP, UDP, IP, HTTP, FTP, SMTP, DHCP,
DNS, ARP,ICMP, POP3, NTP, UPnPTM

User access limit

Max. 20 simultaneous accesses

Buffered images^*2

Approx. 250 images (320 x 240)
•standard image quality •with time display

Image transfer method

SMTP^*3, FTP

Image buffer/transfer triggers

Alarm or motion detection

Network camera

Zoom

10x digital zoom (by area)

Viewing angle

53° horizontal
41° vertical

Sensor type

1/4 inch CMOS sensor, approx. 320,000 pixels

Lens focal point

Fixed (focal range: 0.3 m to ∞)

Lens brightness

F2.8

Required light intensity

10 to 10,000 lux (in color night view mode : 4 to 10,000 lux)

Wireless

Standards

IEEE 802.11b/g

Antenna

Diversity

Number of channel

11ch. (USA), 13ch. (Others)

Transmission speed

Up to 54 Mbps.

Security

WEP (64/128/152 bit), SSID

Terminal

Network interface

Ethernet (10Base-T/100Base-TX)

General

Operating temperature

+5°C to +40°C (+41°F to +104°F)

Operating humidity

20% to 80% (no condensation)

Dimensions (H x W x D)

85 x85 x35.5 mm
(3 3/8 x 3 3/8 x 1 3/8 inches)

Weight (only the unit)

165 g (0.36 lb)

Power supply (E)

Input: 220-240 V AC,
output: 9 V DC

Power supply (CE)

Input: 100-240 V AC,
output: 9 V DC

Power supply (US)

Input: 120 V AC,
output: 9 V DC

Consumption

4.6 W

Operating System

Windows® 98/SE
Windows® 2000
Windows® Me
Windows® XP

CPU

Pentium® III (500 MHz or greater is recommended.)

Protocol

TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)

Interface

10/100 Mbps network card installed

Web browser

Internet Explorer 6.0 or later
(Not included on the Setup CDROM)


		CART CONTENTS:	HOME \| VIEW CART \| CHECKOUT \| LOGIN \| CONTACT US \| PUBLIC SECTOR \| RETURNS \| SUPPORT \| ORDER TRACKING \| DELIVERY INFO \| HELP \| FAQ \| T&C

Network Storage for IP Cameras